[mike2004tct]

Originally Posted by Markb873

Hello,

Got a '93 s10 blazer with the 4w abs. I am having two problems. My right front has developed a pounding in the wheel area when the brakes are applied I can sort of feel it in the pedal but more or less hear it. (It makes the dash and the door rattle.) New rotors with some improvement. Checking a few days later everything was still tight. The strange thing is occasionally it won't do it.

The second problem is slow pedal return. At night I can take my foot off the pedal look up in the mirror and watch the brake lights turn off. Their is vacuum going to the booster and the pedal seems to operate normal otherwise. I've seen with the hydro-assist systems a hydrolic problem in the booster cause the pedal to slowly rise but can a bad "basic" booster cause similar symptoms?

-Mark

The booster is vacuum operated, and mainly used for applying pressure, not releasing.

I'd venture a guess as to a gummed up master cylinder. The spring inside the cylinder causes the pressure release to be slow (in your case). This might also be causing the pounding sound you hear. I'd also say, that if the master cylinder is gunked up, it's a pretty good chance that the calipers are also gunked with crud in the brake lines.

Check the fluid in the master. Is it black and grainy?