[marknoftall]

I have a 01 Windstar 182 000 km. Replaced both control arms, both front wheel hubs, both outer tie rod ends, 4 new tires. Had a wheel alignment done, which was a success. However, 4 months later van pulls right and steering wheel off centre, have another align at different shop. They say they can't do a proper align cause they would need to re bore the strut because camber is off, but they can align the steering wheel and do best they can with align. Van still pulls right after 2nd alignment and steering wheel still off centre. Also, when lifted on ramp, when wheel is cut fully, there is contact between the front end ( strut I think ) and the brake line on driver side. What is the problem here? Any suggestions would be appreciated.