View Single Post
  #3  
Old 12-11-2008, 08:13 PM
LadySmith LadySmith is offline
AF Newbie
Thread starter
 
Join Date: Sep 2008
Posts: 74
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Automatic Locks when you put car in gear - wiring question

Quote:
Originally Posted by ZiggyPA
anti-car jacking?

Unfortunately it seems the PA's of this age have a lot of electrical issues with these features, I have a bunch of them myself, sometimes they work and sometimes they don't.
I know that electrical issues such as this are common with many vehicles of this age, but I was just hoping I could figure out which wire or whatever it is. I'm really thinking it is the wiring in the door, but don't know which one controls what. It really seems that whatever controls the automatic locks when you put it in gear also controls the radio staying on until the door is open.

Then, I think there's a different wire somewhere in there that controls the passenger window control. The driver side control can roll down the passenger window at any time, but the passenger side window control works when it wants to it seems. But, if you mash around on the driver's side inside door, it kinda moves around and then the passenger control will work...lol

I was reading on another thread about something called a PNP (Park/ Neutral Position) switch/ circuit. Where is that located and would it have anything to do with this?
__________________
Alabama
1995 Park Avenue - 3800 Series II - now at 169,000 miles

New owner of a 1999 Buick Century Custom - 75,000 miles
Reply With Quote