Howdy all.Great site very helpful.My 96 Windstar 3.0 liter w/150XXX miles will not start.Fuel pressure is OK.Pulled 2 different plugs at different times and locations and no spark.Checked + wire to coil pack has 12+plus volts.Replaced coil pack still no start.Replaced both crank and cam sensors and still no spark.Also replaced ignition control module and still no spark.Checked all fuses,all OK.Checked codes w/Actron reader and said no codes.
Visually checked harness did not see anything obvious.A little history.Drove to store,went inside 20 min,came out no start,waited 20 min and tried again,started right up and drove home w/no prob.Waited 30 min and no start/spark condition started.Anyone have an idea.I'm tried of throwing money at it. Thanks for taking time and reading this post.Joe