Here is what has been done so far.
Replaced the ignition control module, all 3 coils, Plug Wires, spark plugs, CTS (Coolant Temp Sensors) BOTH, TPS Sensor, IAC Sensor, Performed Injector Cleaning, Fuel Pump, Filter, Strainer, and Replaced the ECM.
Tested the fuel pressure and it is in within spec.
Now here is the problem when the car gets up to temp and the fans kick on the engine shuts off and you cant restart the engine until it cools .
Now when you unhook the sensor and install a paper clip in the connector the car runs OK and does not shut off just uses alot of fuel.
When you hook the sensor back up the engine stalls out.
Have performed a OHMS test between the CTS connector and the ECM plug.
and I get like 4 ohms on each wire.
I am thinking that the wiring going to the CTS sensor from the ECM is shorted out against something.
Does anyone have any idea what the problem could be???
I am currently in Afghanistan talking to my wife back in the states via the Internet which has performed all the work above as she is a pretty good mechanic . This is our only vehicle and we really need some help .
Would someone please help us out.
Thanks,
Mechanicmangg