Quote:
|
Originally Posted by braddc
I assume that the BCM tells the PCM that everything is OK to proceed based on input from the key cylinder. If the cylinder is taken out and replaced by a starter switch, can the switch be wired straight to the PCM? If so, which wires from the switch would need to be connected in order to fire up the PCM and the starter?
|
No. You need BOTH the BCM and PCM to operate properly. You can wire past the Passlock system by using the correct resistors if you want then you can use simple toggle switches to turn the ignition on and such. You've gotta get the dash cluster to power up. With out it, the vehicle won't fire.