11-15-2008, 01:00 PM
|
|
AF Fanatic
|
|
Join Date: Oct 2007
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
|
|
|
Re: More than I want to chew
Quote:
|
Originally Posted by T Wrecks
OK, I'm new here. I'm rebuilding a 2004 silverado 2500 out of 2 trucks. I had to do a cab swap because the truck was a rollover. Both trucks are 2004's. the truck I'm building is a 5 speed and the cab I'm using was an automatic. I used the dash harness that came on the cab because it has power door locks. I used the ecm, bcm, column, instrument cluster, and engine harness from the roll. The instrument cluster appears to be working correctly, other than the battery light stays on reguardless of the key position. The truck stalls after a second or 2 like the theftlock is kicking in, but the light is only flashes a couple times then goes out. It showed 1 code for throttle position that I cleared and never came back. I tried the relearn procedure with no luck. I could sure use some suggestions. thanks, Travis
|
if the engine starts then dies I say fuel pressure test....
|