Quote:
|
Originally Posted by ponchonutty
 I have never seen a remote start done this way. I mean I can do this on a 2008 GM vehicle but not an old one like yours. I don't understand how the truck can differentiate between the remote starter or the ignition key other than not using the "key in ignition" switch. If you can bypass the system for the remote start then why not with the ignition key too??? Sounds fishy to me.
I have many programmers in my shop too from a GM Tech2 with the Candi module to a $8,000 SNAP ON unit. What kind of "scanner" did he use? I have spent a lot of time inside a few GM computers but never found an area where it says to ignore the Passlock reading when remote starting or anything close. I've been in this bizz for 15 years and have heard people talking about doing a remote start simular to this but no one ever coughs up ways to do it. I sure would like to hear from your installer. Please send me a PM with his contact information. Telling us that you had this done with out sharing the actual ways of doing it are pointless. |
Alright Ponch. First you insult my intellegence a little and I got over that, but now you question my results and methods to get there? You're really starting to pi$$ me off. It's as if it's impossible for someone else to know more than you. You've got a lot to learn man.
If you're so dead set on the fact that it's so impossible and that my installer and I must be full of sh!t, then you call the shop and talk with the owner. If he wants to give out the installers personal number, then that's his business. I can't do that. But he will tell you that he doesn't use a generic bypass module. I'm not out to hide anything...especially hide address and contact info. Call them yourself and ask about installation methods. I'll tell you right now, the owner is going to tell you that he brings in a guy from a couple doors down to do the installs. He's an older guy who only comes in the shop for remote starts and trouble shooting, etc.
So here's the info. Call them...please. Just so you can find out you're not the only "know-it-all" on the planet.
Pittsburg Auto Glass
920 W. 4th St.
Pittsburg, KS 66762
620-235-1111
Owner - Brian
Remote Installer - Tom