Quote:
Originally posted by P10DET
I finally measured the extension of the bumper covers.
Front 90mm
Rear 100mm! 
From these measurements I'm thinking it might be possible to install the JDM bumper cover over the USM bumper, but of course that's total speculation at this point. Having the bumper off the stuffed T4 would go a long way towards figuring this out. If I can figure it out, I know there is a market here in The States for Primera bumpers. 
BTW, I heard from my friend in Japan about the lube intervals. His owner's manual says nothing about it (strange). He's going to check his UK Haynes Primera manual and get back with me. I'll send you a private message with his e-mail address.
|
Hopefully that extra extension is all due to the styrofoam and you might be able to set the bumper cover into position after it's removed.
If Grunter can't help with the bumper cover, I'll ask around here and see if I can scrounge something up. If we can get a couple of broken covers, you might be able to get a plastic welder to stitch them up into a good one
Re the lub oil queries: I have a translated version of the JDM P10 owners manual and it doesn't give the 4wd lubricant specs either. I also have the Uk Haynes manual which doesn't cover 4wd. Don't want to stuff it up since it involves viscous couplings and VLSDs. Thanks for the address, I'll write to him soon.
