Quote:
|
Originally Posted by AF_Dali
My 97 Malibu anti-theft start-up problem had be annoying me for a very ling time. This week, I fixed it using your method!
I started my car first, then cut the yellow wire, measure the reistance value using a multimeter, find a same value resistor and connect it as instructed. The anti-theft light is gone, and no start-up problem since then.
The only difference is that the resistor that I used is 6.25KOhm.
|
The resistance will be different on just about every GM car made. I remember back when these units first came out DEI had made a manual bypass in which you flipped a series of dip switches to make it match the value needed. If I remember it was something like 30,000 different values you could come up with.
Glad you could get it going again.