Quote:
|
Originally Posted by Chris Stewart
I believe the 3rd stoplight is on a different circuit and brakelight switch.
Have you checked the brakelight switch at the brakepedal arm?
I think there are 2 buttons sticking out with one button going to a double acting switch....one normally open to the brakelight and one normally closed going to the cruise control.
With the brake pedal pushed down, I reach up to the switch buttons and depress them with a long thin screw driver then "side step" the screw driver so the buttons snap back into position to make a better contact to close the brakelight circuit.
|
This vehicle has cruse control. There seems to be a single switch on for cruse control cut and stop light. It is a white rectangle that is pulled on by the brake arm. Again, all bulbs and fused have been checked and verified good. Curse control works normally, and third stop light works. Hazard flasher does not work. Is it possible that the Hazard light switch is faulty? It looks like the stop lights go thru that switch after the third stop light.
Ralph
