[lt170chevelle]

ok well believe it or not it only cost me a couple bucks for carb cleaner. i took the injector that was leaking out, took it to work and put it under a micrscope for inspection and the leak was actually an oring that was around a torx screw that screws int the middle of the injector. so i had orings at work and put it back in with no leaks...but i still have a cold start problem. i hear the pump come on like it should but it will not start till after about 10 trys..i am going to see if i am getiing spark when first trying it.when it does finally starts it putters then slowly smoothes out.but it doesnt even try to start till after the 10th attempt.any ideas?