|
Re: 91 Camaro dies when hot
Pull the ignition module and take it to an auto parts store and have them test it. If it fails, replace it with only an AC Delco unit, the others are junk. Don't forget to use the special thermal grease on the metal side that sits against the distributor. (it comes with the module).
If the module checks good, ohm out the injectors. They should be 15-17 ohms and there should be no more than .5 ohms difference between any of them. Check them cold and hot.
$200 EACH???? Where did you get them and are they made of gold?? Is your Camaro TBI or TPI?
Last edited by Morley; 09-05-2008 at 01:54 AM.
|