[rhandwor]

The rebuilt rack and pinion comes with inner tie rods you didn't mention the outer but they don't go bad as frequently but check and replace if bad.
Replace any bad parts you find as you are doing the job. Measure the length of the inner tie rods from the nut to the end of thread and set the same.
You will need a wheel alignment when done. The rebuilder will probably recommend a screen on the power steering pump inlet to catch any broken parts. Follow their guidelines so you don't void the warranty. Ford's aren't that much different as long as they are rack and pinion. Probably at least a days work if you haven't done one before.