Quote:
|
Originally Posted by brcidd
Any aftermarket alarms or keyless entry? You could have a bum starter interrupt from a bad installation job if so..
Other than that, it could be ignition switch- I always test this by putting 12v to yellow wire in steering column- afte I confirm it is dead when ignition is turned to "start." When starter cranks- then, the ignition switch is bad.
With PasslockII it has been my experience that truck will crank start, then stall within 2 seconds, and the security light will flash. Is your security light flashing?
|
No aftermarket alarms but it does have keyless entry.
When I use a screwdriver to bypass, the engine will turn over but it won't start. Before when turning the key, the engine would always start and fire right up, running perfectly.
How do I test the ignition switch exactly? DO I cut a wire? WHat shoudl I be looking for here exactly?
Any other ideas guys?