|
95 Blazer flashing SES
I've got a 95 blazer 4.3W. I just replaced the spider, nut kit, crank sensor, cam sensor, Dist cap & rotor, plugs, coil. The SES light will come on and flash after about 30 seconds of running. I can shut it off with my scan tool but it comes back. The scanner is digimoto 3.6 on my laptop. It doesn't show a code but it shows the light is on.
I also encounterd another problem. I checked the compression, it was 150 - 160 on all 6, as long as I had the plugs out. The blazer wouldn't start after I installed the plugs. I had to hit it with a squirt of starting fluid.
I've got 247k on the beast. I did all this work because it died on me and wouldn't start about 6 months ago, never got around to fixing till now.
|