Quote:
|
Originally Posted by BNaylor
How far did you dismantle the console to determine you need to remove carpeting? Last time I checked you can see the wiring harness and electrical connector that feeds the 12 volts and ground to both receptacles as long as the door is open and ashtray removed as a cursory inspection.
 |
The console is sitting on my work bench.
I used a needle probe on my DVM to penetrate the wire nsulation where
it disappears under the carpet. No voltage there. I'm losing it between
there and the fuse block. I need to get under the carpet but I don't want
to mess it up.
IHS
Ted Leber