Thank you for the information provided, but I still seem to be having an issue. Now that you have given me the pin numbers can you tell me the way the slots are numbered. I tried it a couple of different way going across like 123 on one row and 456 on the next and that didn't work. I did get the turn signal to blink normally but in the wrong positions. I went out and looked at the connector and with the clip side up 1 is on the right and 3 is on the left then 4 oon the right 5 middle and 6 on the left or something like this.
3 X 1
6 5 4
As some added info I had the transmission replaced while in England when I had had the 4 bulb european lights in and had some issues when I picked it up of the lights not working correctly. Is there anywhere else that the wiring could have changed and now that I have the correct pin outs something else is wrong. Is there a wiring schematic for the 3 bulb us lights. Thought maybe I could check and see if I could look at what combination turns on the turn signal, brakes etc. Finally as as last solution is there a place online or somewhere to buy the 4 bulb yellow turn signal european light if I can get this figured out.
Thanks, Jay