|
Re: Swaybar bushing bolt broke...now what??
I'd be looking at the procedure in the service manual. I don't have it here at work but IIRC it outlines dropping the 2 subframe bolts and easing that down about 2-3 inches. Once that's done the space is pretty open. I've done this twice now when I've replaced the sway bar bushings and it was pretty easy. I used bottle jacks to lower the frame slowly. If you can't find this procedure let me know and I'll look it up.
Piper
__________________
-----------
2000 windstar 3.8
2010 honda pilot touring
Muskoka Canada
|