|
with dsm injectors you'll need either 10ohm resistors on each red/black line going into the injectors or you'll need the resistor box that comes from 95 and older accords or 91 and older civics. the box looks like a little grey amplifier. and when you've gotten that, you'll need a fuel management unit that can control the injectors as well. good luck with your build up!
__________________
94 SI, B18B1, port n polished head, SRP 9.2 slugs, Eagle Rods, Total Seal rings, ARP bolts, Nuformz blockguard, MSD ignition, apexi V-AFC(hack), PYR chip(8500 redline), 450cc injectors, bbk f/p, custom T3 kit w/MP equal length manifold, huge intercooler, restrictive 2 1/2' exhaust
next mod: Hondata+GM MAP
|