Quote:
|
Originally Posted by kerk
2001 Windstar -
I have a misfire in #3, P0303. I pulled the wire and put a plug in it and did not see any spark. I tried a new wire and didn't see any spark. I took out the plug and put a phillips screwdriver in the boot, and using insulated pliers put it by grounded metal and no spark. I'm thinking coil pack but I have no idea how to remove it or be sure I didn't do something wrong and really the EGR ports are clogged.
Opinions?? Suggestions?? Directions for removing the coil pack??
Thanks!!
|
The coil pack is held on the engine by 3 screws, 2 on one side and one on the other; I do not remember the size but I think it is 5/16.
If you have some difficulties to reach it, you can remove the cowl vent panel that will make the job easier (but longer). I have changed my coil pack at 100K miles or so, for a similar reason as yours ( engine misfire) and I have found some craked on it.