[jdmccright]

I would be concerned if the front and the rear tires were the EXACT brand, model, size. There can be differences between models of tires, and sometimes even the same model can go through minor design tweaks.

I would first consult your owner's manual or the vehicle's load rating sticker to be sure that the correct tire size is indeed on your rims (I see from tirerack.com that they do match...205/65-R15). I'd look at the size numbers molded into the tires as well.

Then I'd take a close look at the tires edge on to compare the sidewalls. Are the fronts or rears bulging out more or less? Disregard the portion where the tire is touching the ground. A straightedge might help you see this curvature relative to the rim. If they are different and the tires are EXACTLY the same type, then the installer should re-seat the bead.

Another thing to check would be the inside beads...are they consistent with the outside? Or are they different? If they are different on the same tire, I'd definitely take it back to have them remounted.