|
Re: logger results help 1st thru 3rd gear pulls
i did a boost leak test yesterday and found major leaks all around the t body i mean so bad it would hold 10psi of boost for like 5sec. max.
yes the logger sees knock free reving like 24 counts at certain rpms that was before the leaks were fixed, just fixed the leaks hopfully and waiting for the gasket sealent to dry. i mean from the t body elbo to the connection from tbody to intake and even the biss was so bad you couldn't even keep your finger on it during the test.
i reset everything 12psi boost,afc reset,and timing so once everything dries i'll go for a run and keep you posted. thanks
also the knock sensor i had out and were it touches the block its gummy, so is it bad or when that gummy crap starts coming out the sides its bad?
__________________
550cc's,walbro 255fp,stock 14b at 15psi,palm m130 with mmcd logging software,2 1/2in. down pipe to 3in. exhaust, high flow cat.,2g maf with k&n,custom intake,aftermarket boost guage,mbc,6 bolt with 160 compression. in closet:b16ge3 turbo,rochester 680cc inj.
wish list:wideband,headers,1000cc,e85 conversion,dsm link or map,fmic,20g,272 cams,arp head studs,2600 clutch,lsd,keydriver,. 13sec. daily driver  goals.
|