Quote:
|
Originally Posted by angus10
The right front push in drive axle is loose where it goes into diff housing. Is it most likely the diff housing bearing ? Or will replacing the drive axle correct this? And is the bearing and seal easily replacable from the outside or does the diff have to come out and replace from inside? TIA
|
Up and down or in and out play.
Is it giving problems.
Get a dial indicater on it and tell us how much play it has.
Right side may be a bushing on axel shaft but not sure on that.
Pull axel out and look at it for wear first.
Then check parts book for bushing or bearing.
MT