Quote:
|
Originally Posted by snigri
Mileaway1980 – thanks allot for the prompt respond. Took your advise and filled the reservoir completely (BTW – When the top is up, there is no pressure and this is the way to fill it, I try both, and got the oil spilled when top was down – probably means pressure at the reservoir). However, still have the same problem. To add more details, now (and before), when it will pause, there is no sound from the motor just clicks of the relay (note, the motor was refurbished and should be OK). Any idea in regards to the next trouble shooting steps? Thanks allot for the support – great to have this forum when getting frustrated…
|
I am only specuating, as I haven't looked at the top motor. But if I were having the problem of the motor shutting off too soon, I would suspect a limit switch in the system somewhere, possibly a pressure activated switch since the motor stops when the top is almost up. Look for an adjusting screw on the motor, or on one of the actuators.
As for the top twisting - the original problem on the thread, it would either be a dragging actuator or a restriction - trash maybe - in one of the hydraulic lines. For the hydraulic actuators to work together, there has to be a pressure equalizer that senses the pressure to both actuators and equalizes as the system is moving. So there could be a problem with the equalizer system.
Never have had a problem with my '94 top - knock on wood!