|
Re: E316G wastegate issues
My first thought was the bleed hole on the WG side of the MBC. Make sure it's there and open. Some MBCs put the bleed hole in the NPT to hose barb fitting, so you could have it on the wrong side of the BOV. Others assume you're going to have one installed in the vac line to the WGA. And so on. It sounds to me like that bleed hole is missing or blocked. It's what lets the air out of the WGA when the MBC closes. 
__________________
Kevin Jewer
RWD Talon - 7.92 at 180
Mightymax - 10.7 at 125
|