Quote:
|
Originally Posted by Eubie
After a month of the MIL coming on then going back off after a few starts, (gas cap OK) the truck started, ran about 100 yards, then died. It won't restart. I hear a fuel pump noise under the tank. Dash lights come on normally. Any obvious places I should check before I go into full--break out the factory manual--troubleshooting mode?
If I need to break down and buy a scan tool, any suggestions? I don't mind simple and cheap but if it will do everything I'll ever need on this truck, I'll invest in a good one.
TIA
|
Do you have spark?
Check fuel pressure with fuel pressure gauge. I believe should have 60-65 PSI.
another thing is that the 97's are known for faulty ignition switches. Do a search using ignition switch and this may also give you some info.
Here are a couple scan tools for laptop that may be of interest to you, also do a google search you may find more:
http://www.autotap.com/?s=ask5
http://www.autoenginuity.com/
Check with autozone or checker auto parts stores they may have a scan tool that you can put a deposit on, scan your vehicle for codes, then return it and your deposit is returned to you.