Quote:
|
Originally Posted by MT-2500
You need 60/66 lbs of fuel pressure.
65 on cold cranking.
Even a few lbs low will keep the injectors from squirting on a cold start?
Watch and check the fuel pressure while the engine is cranking.
Will it start with a shot of carb cleaner?
Have you rechecked for checked for good hot blue spark at all plugs?
Any security lights on?
Do you have plenty of gas in it or tryed adding 5 gallon?
Does fuel pump prime up on key on and run when cranking engine?
|
engine cranks with about 65 psi...
engine had good spark yesterday
no security lights on
tank has 10 gallons in it
fuel pump primes and pressurizes (new)
funny thing is when i put carb cleaner in the throttle body it didnt do anything so I checked the spark again at the coil and its dead??? It worked fine yesterday and the plugs were firing. ok so I am gonna go check on the ignition circuits and I'll keep you posted