Thread: hub assembly
View Single Post
Old 04-15-2008, 07:38 PM   #13
Morphe
AF Newbie
 
Join Date: Apr 2008
Location: montreal
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: hub assembly

Quote:
Originally Posted by BNaylor
Welcome to AF.

I've got the GM Factory Service Manual for the 2002 Alero/Grand Am which may be similar. Are you looking for wiring termination points or point to point wiring? The harness from the hub feeds over to the ABS Modulator which also has the EBTCM module used for ABS and traction control. Located driver's side on the engine cradle/subframe under the inner apron area.
Thanks for your fast reply! I wanted to buy this manual .. but i'm getting a hard time to find a used one on Ebay. I'm looking for the wiring termination points and the point to point wiring. Both will be very usefull when it will be the time to verify the new harness.

If I succeed in making this harness, I will post the complete solution / materials on the tread. *( I will probably make a nice .zip file ).

I will need to remove my harness and calculate to correct length of wire, but having the schematics will make my life easier ..lol.

Thanks a lot again BNaylor!
Morphe is offline