Problem fixed! (I hope). My dad knows a little about locks so I had him look at it. We took the actual cylinder out. There is a long narrow brass cap that covers the lock pins. This had come loose enough to stick up a little and catch inside the sleeve. He popped that back into place and the key tured all the way to start. I put it in the car, reset the anti theft and it worked fine. To reset the anti-theft you turn the key to "run". Let it sit in that position for 10 minutes, turn it back to "off" and then start it. I stopped and Advanced and cancelled my order for the new one($210). I hope this helps others as I see alot of post on here about this.