|
Re: Spark Plug Wires
Well let me give it to you this way....
Its not EASY but it can be done. To me those look like universal plugs which i did make a set for my old 2200 out of an MSD V8 kit. Its hard to tell but your going to need the boot for the plug end to be straight ( no 45 or 90 angles will work), the plug boot that attaches to the coil pac needs to be only a 90 degree boot.
The boot for the spark plug should be already connected for you and you have to use your stock wires to measure for length. Cut them a little longer then needed because you have to trim about 1/2" away to expose the core wire which needs to be overlapped when you install the metal connector inside the boot.
__________________
Please don't PM me with your J-body Issues. Post appropriately in the forums,
and I will toss my opinion in your thread if I have anything to help. - Thanks!
2006 Chevrolet Trailblazer
2010 Glastron GT 205XL
|