|
Re: How do I change the hi/lo beam switch?
There is a small switch on the top/left of the steering column that is activated by a push-rod that is moved when you pull on the lever. Depending on exactly where it is, you may need to partially drop the steering column. Just keep turning the highbeams on and off until you find the rod that runs down the stereing column and follow it to the switch (it moves about 1/2" or so). I think there's 2 nuts and a screw holding it on, and on my '86 it shares the studs for the ignition switch.
__________________
'04 Cavalier coupe M/T 2.2 Ecotec
Supercharged 14 PSI boost, charge air cooler, 42# injectors
Tuned with HP Tuners
Poly engine/trans/control arm bushings
Self built and self programmed progressive methanol injection system
|