[mightymouse466]

I FIGURED IT OUT!!! My truck still has the factory battery cable that splits 2 ways from the battery post clamp. One cable goes down to the starter solenoid on the starter, the other goes to the solenoid on my fender. I checked voltage at the fender solenoid and had 12v. I checked voltage at the starter solenoid and had 9v and it dropped to .3v when trying to start. I cut off the cable going down to the starter and replaced it with a new one, which I bolted with the short cable at the fender solenoid. Also replaced the small wire that runs from the other terminal on the fender solenoid down to the starter solenoid just to be safe. After everything was hooked up I gave it a shot. Started right up. Ya!