Quote:
|
Originally Posted by chubbygoatboy
and there is only 1 coil pak with all 6 wires going to it????
|
1 coil pack with 3 coils within, each firing 2 cylinders. The PCM fires the pack. Heat the coil up with a hair dryer for a good 10 minutes. Then try starting. If that wakes it up, replace it. Not the case? Try heating other components. How's the battery? Should see > 9vdc across the posts when cranking on the coldest morning. Should see 18.5k ohms to 26.7K ohms resistance on the plug wires depending on length. Was the pump warm when checked? If yes, might check it cold.
tempfixit Where's this free online service manual?
*