Thread: Hard Cold Start
View Single Post
  #4  
Old 02-24-2008, 01:25 PM
BugI325 BugI325 is offline
AF Newbie
Thread starter 		 
Join Date: Jan 2008
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Hard Cold Start
I have found a Code 1262. I pulled the idle air value, cleaned it and checked it. The manual says it should be ABOUT 40 ohms, and 20 ohms accross the terminals. Mine checked out at 45.3 ohms, and 23.3 & 21.6 ohms. Is that a bad reading or good? - or is it that about 40 ohms?
Reply With Quote