Quote:
|
Originally Posted by gweak
I’m replacing the lower intake manifold gasket & I am at the point of removing the fuel injection rails & injectors. The service manual says to remove the rail mounting screws & just lift the rails with the injectors attached out as a set. I tried to do that, but it’s not coming out easily & I do not want to pry it for fear of damage. Should the injectors be disconnected from the rail & removed separately? I’m not sure how the injectors are mounted to the lower intake, are they just slipped on or are they treaded? If they are slipped on, maybe I could just wiggle the injectors loose while lifting on the rail.. Any help would be appreciated.
Gary
|
what book are you using? I need to know how to do that my self. i got a 2002 se1 with the gasket leaking, and the usuall problems, slightly rough ideling, jummping 500 rpms.
my email
[email protected] please send any info you got, thanks!
Zack