|
Re: nitrous on 2.2
one way or another you will need to "splice" into the fuel line. this may require some fabrication on your part. you will need to make sure the pump you are using will give enough flow to power the engine normally, as well as the additional fuel for the spray kit. pressure is not enough, as pressure is only resistance to flow/volume. you will need to make sure you have enough fuel volume as i said. how big of a shot are you planning to run? manual or auto trans? given the fact that i own a '98 s-10 bone stock with the 2.2, i understand why you want more out of it, but my opinion is that the 2.2 is not worth modding. that being said, good luck. you might wanna try looking for an adapter that will make the fuel line split into two outlets where it connects to the rail, assuming yours has the quick connect by the intake(my 98 does). and please, post back results....even if you blew the motor, i personally will not laugh. all knowledge is power.
__________________
Disclaimer: I am not perfect, i may be wrong in my advice from time to time. Also note that any advice given is as is with no warranty whatsoever, and i have zero liability if you get hurt for not being safe while working on your vehicle.
|