[jipkc]

Are you ready, here goes. You need to start with all doors closed, sitting in vehicle. Then put key in ignition. Open drivers door. Turn the key to the accessories position to the off position(not lock position) three times. Close and open the door two times. Turn the key to the accessories position to the off position three times. Close and open the door. The power locks will ;pck and unlock two times. After that, just hit a button on the remote. The locks will cycle again, showing programming taken. You only have 15 seconds in between each step to do this. Try not to get aggrevated if it doesn't work the first time. So you know, I am an Isuzu tech. So this isn't some weird thing I came up with.