Quote:
|
Originally Posted by Elliott000
I went for my road test today for licensing to discover my brake lights dont work...the fuse was popped so i threw in another . The hazard lights work and all signals work(thier on a different fuse) but as soon as i touch the brake pedal it pops the fuse, I crawled under the back and checked the trailer plug alls well its never been used, i opened up the dash to check the wiring from the switch to fuse panel and all seems fine. Replaced Switch @ pedal to no solution
What of this multi switch, everything works fine bulbs, turn signals, hazrds just no brake lights
|
Yikes that sounds like a bad one. I would pull the brake light bulbs one at a time just in case one of them is defective and pulling too much current when you hold the pedal down longer than a hazard-flash-interval. After that I would dig in and check all of my major grounds and connections at the harnesses. Good luck, and let us other '97 owners know what you find!