[dave92cherokee]

For all your lights that have the cigar lighter plug in connector open the connector up the wire that goes to the sides of the plug are the ground and the wire that goes to the middle post is the positive wire. For the switch box is it just 1 switch or multiple switches? If it's just one switch then run all the wires into the box and connect all the positives and negatives to each other and then run a power and ground wire into the box for activating the lights. If it's multiple switches (which would be best and most versatile) run the power and ground wire into the box and connect it to all the switches then run all the lights into the box and connect to each switch by itself or pair them up IE front grill lights, back window lights like that. As for the cb for power you could probably hook it up to the power wires for the radio so the cb would only come on when the car is running.