Quote:
|
Originally Posted by Yello72
Changed the lock cylinder and now it will crank but not start. The theft system light is flashing. I there a way to reset this. It is a 97 with a 2.4 and auto trans.
|
Try the relearn.
The book says to clear codes first.
Turn key on and hit start and if no start turn back to run for 10 minutes untill light goes out.
The back off and then on and see if light goes out.
Then see if it will start.
If battery is low you may need a charger or jumper on it for the 10 minutes key on relearn.
Good Luck
MT