|
Re: More things to check
^ Thanks Gary... I'm going to be removing both the corbeaus to install my ultrashileds. I too noticed that the passenger seat didn't have a back brace.
Some things I noticed last night from poking around:
1. Side pipes use rubber strip w/ multiple holes as a hanger, thse can rip/tear, check them if your pipes are not centered in the opening, you don't want to be burning your rockers.
2. For those that don't know the holes in the rockers lead to a metal tube that is a quick jack feature. You need to get or make an insert and you can quickly/easily jack up the side of the car. On mine the driver's side hole lines up fine, but on the passenger side the hole is lower and forward of the tube. At first I figured the car had been wrecked, but then a simple chek of the hole's location on the rocker showed that the right side hole was simply on the wrong place compared to the left side.... out comes the hole saw.
3. Check your body supports... in a few cases mine have been over tightened causing the plastic panels to crack. There are a few 2-part adhesive repairs for urethane panels.
4. Go over your PI dash and the owners manual... I found my wheel speed sensor and it's broken and not installed (no trigger and not mounted).
|