|
sounds like you have a decent buildup goin on... with the intake, i'd go for the RPM Air-Gap. they flow really well in the high rpms, and don't sacrifice low end torque. as for the carb, i'd personally go for a Demon 750 rather than a Holley. just a personal preference. i'd estimate you HP to be around 350-375 depending on how big your combustion chambers are with those flatties, if you mill the heads, or deck the block. just be careful not to let your compression ratio go above 10.5:1 else you'll run into detonation problems.
__________________
11.67@117
"plaster your ass to the back glass"
.... put yer motor where yer mouth is.....
|