View Single Post
  #2  
Old 08-24-2001, 03:04 PM
endfro endfro is offline
AF Regular
 
Join Date: Mar 2001
Posts: 144
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to endfro Send a message via AIM to endfro Send a message via Yahoo to endfro
Do it yourself. Its so easy.

Right near the climate controls are two screws.. unscrew them. Take out the ash tray. Right above the stock deck are two more screws, take them out. Then you pull the entire "console" piece off. Disconnect the buttons above the stock deck so you can pull it out. Then on the left and right side of the deck there are two screws. Unscrew them. Pull the deck out and unclip it.

There ya go you have your stock deck out.

Make sure you save the things that screw into the left and right sides of the stock deck. They are what you use to mount your aftermarket deck. Also, the only way you can ground the power for the deck is by screwing it down there. So you have to do that in order for it to work. =]

There ya go.
Reply With Quote