[bluebuick91]

Hey all, got the blazer to start, changed the ignition switch. Seems to start ok now. Was revving the motor, and could hear that a wire was arcing, so found the coil wire had a hole in it. taped it up until I can get to auto parts store. Looking at the wires, cap, rotor they all look like they are original equip. So am wondiering, should I chage them-cap/rotor/wires/plugs and do I need to change the coil as well? I don't know how long the wire was arcing. The problem I have now, is that it will idle fine, but when I give it gas, it has no power, just boggs and when you drive it feels like it is surging with no power. I didn't have a problem until the plugs were changed by a friend. Could he have crossed a wire or something? Would it idle ok like that? I also pulled some codes off of it, they were 0101, 0300 any help would be appreciated.