|
Re: Headlights?
It is possible that it's a bad switch. It's also possible that both of your low beam bulbs are out. Maybe one has been out for awhile, but since there was some light up front, you didn't notice until the second bulb went out as well.
Also, the high beam filament (used for the flash to pass that you say works) uses a different fuse from the low beams. The high beams use fuse 33, a 15-amp fuse in the instrument panel fuse panel. The low beams use two fuses, 4 and 9, both 10-amp fuses in the same panel.
-Rod
|