Quote:
|
Originally Posted by pokerman11
well can't say I"m in love with my Meck right now. He would not tell me the "exact" code (I've got michales manual and could double check) - just that it was the driver side wheel bearing, and that I needed to replace it.
Then tried to tell me my I needed new calipers a fluid flush and clean the rear drums. Being that I just put new calipers and cleaned the rear drums myself less than three weeks ago - I then knew I was being sold up the river. For a price tag ov over $1k.
Seems like a waste to replase the entire wheel bearning / hub assembly for a sensor. I gotta think it's a bad wire to the sensor - will look into that. UNtil then will live with the ABS light and no TSC system.
-
|
Check the connector coming out of the hub, maybe it is just loose. Otherwise a new hub/bearing is about $100 and around 2 hours to replace. Hardest part is breaking the 3 bolts loose that hold the hub on, especially if you live in a place that salts their roads. You may need a puller to help separate the shaft from the bearing.
I've replaced my left, front hub twice in 10 months.