[JoulesWinfield]

It sounds like you may have pulled another connector on the drivers side unknowingly. You can pull the switch panel off the drivers door pretty easily to make sure those connectors are all tight.
After that you will need to check under the drivers side dash. There is a black box that has the relays for the stock keyless entry. That would be my guess for the culprit on door locks. Also if my memory serves correctly there is another connector up in the dash that connects all of the wiring from the drivers door to the main IP wiring. You should be able to follow the harness from the entry point coming through the side of the body up under the dash.

Its gotta be a simple connector problem though, I cant imagine anything was damaged if you were careful moving the dash.