|
Re: Mass Air Flow problem for Z31
try running the ecu codes... it could still be a MAF issue, just something to do with wiring or the connector...
usually a dead MAF will cause the car to go into limp-home mode which will make it run VERY rich and not let you rev above 2k rpm
the procedure to run codes will be in any FSM (factory service manual) for the z31... look for the 84-86 manual.. links can be found at 88hybrid.com
__________________
 ZedEx Crew Member #6
1988 300zx turbo 5spd. 3" mandrel exhaust, filter, afco rad, e-fan, poly engine mounts, mbc at 8.5 psi, turboxs rfl-h bov, gutted plenum, etc.
blown turbo, under construction.. gt35 coming.
|