I went to my local glass shop and explained the problem with the side window sagging. They gave me a partially used tube of DOW Betaseal U-418 Quick Cure Urethane Primerless Glass Adhesive. I marked the position of the glass in the frame, masked off the channel and glass around the frame, then removed the window from the Villager, separated the glass from the metal channel, cleaned both applied the adhesive then slipped the channel back on the glass, allowed it to cure for 24 hours, removed the masking tape & excess adhesive then re-installed it. Now the window aligns perfectly with the adjacent windows. Cost..no $ & about an hour of time. The partially used tube of adhesive was returned to the glass shop with much gratitude. For photos click on
http://abra.homestead.com/villager3.html